To size your equipment
Pipe size, flow rate, line pressure at the unit, what the fluid must do, and the water source.
Pipe size, flow rate, line pressure at the unit, what the fluid must do, and the water source.
Performance Matrix
Advanced shearing and homogenization without gas injection.
| Size | Flow @ 30 PSI | Flow @ 50 PSI | Flow @ 100 PSI |
|---|---|---|---|
| 1.0" | 23 GPM | 29 GPM | 38 GPM |
| 1.5" | 55 GPM | 71 GPM | 98 GPM |
| 2.0" | 93 GPM | 123 GPM | 165 GPM |
| 3.0" | 208 GPM | 268 GPM | 365 GPM |
| 4.0" | 365 GPM | 470 GPM | 643 GPM |
| 6.0" | 833 GPM | 1075 GPM | 1465 GPM |
| 8.0" | 1453 GPM | 1876 GPM | 2653 GPM |
| 10.0" | 2285 GPM | 2950 GPM | 4172 GPM |
| 12.0" | 3250 GPM | 4195 GPM | 5933 GPM |
Scroll horizontally to compare columns.
General Specifications
- Temperature:
1°C - 60°C (33.8°F - 140°F)
(Avoid freezing) - Working Pressure:
Max 145 PSI (10 Bar) - Construction Material (Piping):
Based on physicochemical fluid characteristics
(e.g., PVC Sch 40/80 or Stainless Steel 316) - Solids Allowed:
Up to ½ in solids (Strainer/Mesh filter recommended) - Gaskets:
Viton
Installation Note: Install after batch delivery pump or in recirculation loop. Operates with a downstream pressure differential of 3-5 PSI (0.2 - 0.35 Bar).
Disclaimer: Specifications are for reference only; actual performance varies with fluid properties, operational parameters, and environmental conditions. For precise details, consult our technical team.
